$19,600.00
1.0 ton battery-electric mini excavator. 8.5 kWh pack, no exhaust, low noise, 4 – 6 hours per charge. For indoor and noise-restricted work.
The MX-10E is the same 1.0 ton machine as our MX-10, with the diesel engine replaced by a 48 V lithium-ion pack and an electric drive motor. It exists for one reason: work where a combustion engine cannot go. Indoor strip-outs, basement digs, plant rooms, hospital and school grounds, and any site with a noise restriction on early or evening working.
Performance matches the diesel machine on the numbers that decide whether a job is possible: 5 ft 9 in. dig depth, 12 ft 1 in. reach at ground level and the same retractable undercarriage that narrows to 27.6 in. for a gateway. What differs is endurance and refuelling. The 8.5 kWh pack covers roughly 4 – 6 hours of mixed digging – less under continuous heavy load, more on light grading – and a full charge takes about 6 hours from a 240 V, 20 A supply. It is the right machine for confined and restricted work, not for a full day of continuous digging away from power.
Before you order, check your power. The supplied charger needs a 240 V, 20 A circuit on a NEMA 6-20 outlet; an adapter for a NEMA 14-50 range outlet is included. A standard 120 V household socket will not charge it.
| Operating weight | 2,315 lb (1.0 t) |
|---|---|
| Track width | 27.6 in. retracted / 39.4 in. extended |
| Maximum dig depth | 5 ft 9 in. |
| Maximum reach at ground level | 12 ft 1 in. |
| Battery pack | 48 V lithium-ion, 8.5 kWh (177 Ah) |
| Run time per charge | Approximately 4 – 6 hours, mixed work |
| Charge time | About 6 hours, 240 V / 20 A |
| Charger connection | NEMA 6-20, adapter for NEMA 14-50 supplied |
| Rated cycle life | Approximately 2,000 charge cycles |
| Emissions at the machine | None |
| Bucket supplied | 16 in. digging bucket, pin-on |
| Pin diameter | 1.57 in. (40 mm) |
| Width between mounting ears | 5.9 in. (150 mm) |
| Auxiliary hydraulic flow | 5.3 gpm, fitted as standard |
| Shipping dimensions | 138 x 47 x 96 in. on a skid |
Its pin is 1.57 in. (40 mm) and the ears are 5.9 in. (150 mm) apart. Every attachment in our Excavator Attachments collection ships with a pin and bush kit that covers 40 – 50 mm pins and 150 – 200 mm ears, so the bucket, thumb, ripper and quick coupler all pin straight on. The 12 in. auger drive needs 8 – 16 gpm and this machine has 5.3 gpm, so it will not turn it.
The warranty that applies is the manufacturer’s written warranty supplied with the machine, and the battery pack is warranted separately. Ask us before you order and we will send you both sets of terms – period, what is covered and what is not – in writing. Warranty work and wear parts are arranged through us at info@nestiques.com; we do not operate a dealer network.
WARNING: this product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects and other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Looking after it: charge the pack before it is fully flat rather than after, store it indoors between 40 and 80 degrees Fahrenheit, and keep the charging port cover closed and the contacts dry. Grease the pins daily exactly as you would on the diesel machine.
This machine ships free to any address in the 48 contiguous states on a freight carrier: a flatbed or drop-deck truck, unloaded down ramps at the curbside with you or your driver present. Dispatch takes 1 – 2 business days and transit a further 3 – 6. Unused machines can be returned within 30 days of delivery.
Discover what customers have shared about their experience shopping with PrimeGear Supply.
“The equipment was exactly what I was looking for. The product information made it easy to understand the machine before ordering.”
“The product details were clear and the shopping process was straightforward. I found exactly the type of equipment I needed.”
“I liked the selection of outdoor products and the detailed product information. Everything was easy to browse and compare.”
“The specifications were very helpful when comparing the different graphics card options. The product page had plenty of useful technical information.”
“There are a lot of different products to choose from, and I appreciated having the specifications available before making a decision.”
“The computer selection gave me several options at different price points. The specifications helped me compare the systems.”
2.5 ton mini excavator with reduced tail swing, 8 ft 8 in. dig depth and 24.8 hp diesel. Free curbside freight delivery.
1.7 ton mini excavator, 7 ft 6 in. dig depth, 15.9 hp diesel, auxiliary hydraulics. Free curbside freight delivery, 30-day returns.
3.5 ton mini excavator with a heated and air-conditioned cab, 11 ft 2 in. dig depth and 33 hp diesel. Free curbside freight delivery.
1.0 ton mini excavator on rubber tracks. Undercarriage retracts to 27.6 in. for gateways, digs 5 ft 9 in. deep. Free curbside freight delivery.
Reviews
There are no reviews yet.